Skip Navigation
Skip to contents
Results by Year

View Wide

Filter

ARTICLE TYPE

PUBLICATION DATE

10 results
Display

Influence of Crown Margin Design on the Stress Distribution in Maxillary Canine Restored by All-Ceramic Crown: A Finite Element Analysis

Ozer Z, Kurtoglu C, Mamedov AM, Ozbay E

PURPOSE: To investigate the influence of crown margin design on the stress distribution and to localize critical sites in maxillary canine under functional loading by using three dimensional finite element...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of zirconia framework design on the failure of all-ceramic crown under static loading

Urapepon S, Taenguthai P

PURPOSE: This in vitro study aimed to compare the failure load and failure characteristics of two different zirconia framework designs of premolar crowns when subjected to static loading. MATERIALS AND METHODS:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparative fracture strength analysis of Lava and Digident CAD/CAM zirconia ceramic crowns

Kwon TK, Pak HS, Yang JH, Han JS, Lee JB, Kim SH, Yeo IS

PURPOSE: All-ceramic crowns are subject to fracture during function. To minimize this common clinical complication, zirconium oxide has been used as the framework for all-ceramic crowns. The aim of this...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A comparison of the fidelity between various cores fabricated with CAD/CAM systems

Park SH, Lee KB

  • KMID: 2118758
  • J Korean Acad Prosthodont.
  • 2008 Jun;46(3):269-279.
STATEMENT OF PROBLEM: Recently, various all-ceramic crowns fabricated with CAD/CAM systems have come into wide use in dental clinic. However, there are only few domestic studies on CAD/CAM restorations....
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparative study in fracture strength of zirconia cores fabricated with three different CAD/CAM systems

Shin ES, Lee YS, Park WH

  • KMID: 2321739
  • J Korean Acad Prosthodont.
  • 2008 Feb;46(1):22-30.
PURPOSE: The purpose of this study is to compare three different CAD/CAM systems through the fracture strength of zirconia core and to evaluate the clinical availability of each system. MATERIAL...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
FEA estimates of margin design in all ceramic crowns

Han SH, Oh NS, Jeong SI, Cho JH, Lee EJ

  • KMID: 2321737
  • J Korean Acad Prosthodont.
  • 2008 Feb;46(1):1-11.
STATEMENT OF PROBLEM: Over the past decade, increased demand for esthetically pleasing restorations has led to the development of all-ceramic systems. Recent reports suggest that the all-ceramic crowns have...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Fracture strength of zirconia monolithic crowns and metal-ceramic crowns after cyclic loading and thermocycling

Lee SM, Jeong HC, Jeon YC

  • KMID: 2195693
  • J Korean Acad Prosthodont.
  • 2007 Feb;45(1):12-20.
PURPOSE: The purpose of this study was to compare the fracture strength of the zirconia monolithic all-ceramic crowns according to the thickness (0.5mm, 0.8mm, 1.1mm) and metal-ceramic crowns (1.0mm, 1.5mm). MATERIAL...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of etching time on shear bond strength of resin cements to reinforced all-ceramic crowns

Kim KI, Choi KB, Ahn SG, Park CW

  • KMID: 2195744
  • J Korean Acad Prosthodont.
  • 2004 Oct;42(5):501-513.
PURPOSE: The purpose of this study was to evaluate the effects of etching time on shear bond strength of four resin cements to IPS Empress 2 ceramic. MATERIAL AND METHODS:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A study on the stress distribution of the all ceramic crowns according to the cusp angle of the maxillary first premolar using three dimensional finite element method

Kim WK, Shin DK, Song KB, Dong JK

  • KMID: 2195789
  • J Korean Acad Prosthodont.
  • 2004 Feb;42(1):58-72.
STATEMENT OF PROBLEM: Clinically, maxillary first premolar has a high risk of fracture. This is thought to be caused by the susceptible figure which the maxillary first premolar has. In...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Marginal fit related to margin types of glass infiltrated alumina core fabricated from aqueous-based alumina tape

Oh NS, Yu BS, Kim IK, Choi JH, Kim DJ, Park IS, Lee MH, Lee KW

  • KMID: 2195852
  • J Korean Acad Prosthodont.
  • 2002 Jun;40(3):262-268.
STATEMETN OF PROBLEM: In-Ceram system is one of the all-ceramic crowns that can be used in anterior 3 unit fixed partial dentures and posterior single crowns. The alumina core used...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2022 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr