Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

12 results
Display

The dimensional change of cast implant bars after laboratory procedure

Kwon JY, Kim CW, Lim YJ, Kim MJ

  • KMID: 2195658
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):354-361.
STATEMENT OF PROBLEMS: The precision of fit between the bearing surfaces of implant abutments and the prosthesis framework has been considered fundamental to implant prosthodontic protocol. PURPOSE: The study aimed to...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of TiN coating of abutment screw on detorque force

Kim HJ, Choe HC, Chung CH

  • KMID: 2195655
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):329-338.
PURPOSE: The aim of this study is to evaluate the effect of TiN coating of abutment screw on the unscrewing torque. MATERIAL AND METHODS: Titanium and Gold-Tite abutment screws were classified...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A study of the effect of an anti-rotational inner post screw systems on abutment screw loosening for single implant : Part 1

Choi SY, Lee JB

  • KMID: 2195657
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):345-353.
STATEMENT OF PROBLEM: Implant abutment screw joints tend to loosen under clinical conditions. Abutment screw loosening results in loss of preload in function. PURPOSE: Anti-rotational inner post screw (ARIPS) systems were...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparison between TiUniteTM and another oxidized implant using the rabbit tibia model

Yeo IS, Lee JB, Han JS, Kim SH, Yang JH

  • KMID: 2195656
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):339-344.
STATEMENT OF PROBLEM: Various anodic oxidation techniques can be applied to dental implant surfaces. But the condition for optimal anodized surfaces has not been described yet. PURPOSE: The purpose of this...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Retrospective multicenter study of CSM endosseous dental implant

Park EY

  • KMID: 2195654
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):321-328.
STATEMENT OF PROBLEM: To work the economic limitation of dental implant usage, some types of domestic implant have been developing. But, there have been seldom reported about the clinical success...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Accuracy of the impression technique using thermoforming polymethyl methacrylate tray

Miyashita , Suzuki H, Kishi M, Ko SM

  • KMID: 2195662
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):389-400.
STATEMENT OF PROBLEM: Use of the conventional dental impression procedure is problematic in patients who have difficulty opening their mouth, difficulty breathing through their nose or tendency to gag. PURPOSE: It...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Strength of glass fiber reinforced PMMA resin and surface roughness change after abrasion test

Lee SI, Kim CW, Lim YJ, Kim MJ, Yun SD

  • KMID: 2195653
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):310-320.
STATEMENT OF PROBLEMS: The fracture of acrylic resin dentures remains an unsolved problem. Therefore, many investigations have been performed and various approaches to strengthening acrylic resin, for example, the reinforcement...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparative study on the fracture strength of metal-ceramic versus composite resin-veneered metal crowns in cement-retained implant-supported crowns under vertical compressive load

Pae A, Jeon KA, Kim MR, Kim SH

  • KMID: 2195651
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):295-302.
STATEMENT OF PROBLEM: Fracture of the tooth-colored superstructure material is one of the main prosthetic complications in implant-supported prostheses. PURPOSE: The purpose of this in vitro study was to compare the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of gold electroforming procedure on gold-silver-palladium alloy

Hwang BY, Kim CW, Lim YJ, Kim MJ

  • KMID: 2195652
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):303-309.
STATEMENT OF PROBLEM: The effect of gold electroforming on gold alloy was not studied. PURPOSE: This in vitro study investigate the effect of gold electroforming on gold-silver-palladium alloy. MATERIAL AND METHODS: Three...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Micropatterned grooves and acid-etching on titanium substrata alter viability and gene expression of adhered human gingival fibroblasts: A pilot study

Lee SW, Kim SY, Lee KW

  • KMID: 2195660
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):375-381.
STATEMENT OF PROBLEM: Prior to determining an optimal width of micropatterned grooves provided on titanium substrata, we have done a pilot study using surface topographies in combined microm and submicrom...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Two colorimetric assays verify that calcium sulfate promotes proliferating activity of human gingival fibroblasts

Chae M, Kim SY, Kim SY, Lee SW

  • KMID: 2195661
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):382-388.
STATEMENT OF PROBLEM: The role of calcium sulfate in stimulating the growth of gingival soft tissue has been reported in few studies. Such a unique property of calcium sulfate could...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Bone response of three different surface implants : Histomorphometric, perio test value and resonance frequency analysis in beagle dogs

Choi JE, Suh KW, Lee IK, Ryu JJ, Shin SW

  • KMID: 2195659
  • J Korean Acad Prosthodont.
  • 2007 Jun;45(3):362-374.
STATEMENT OF PROBLEM: The intial stability for osseointegration of implant has been an interesting factor. Especially, in the case of poor bone quality or immediately loaded implant, various strategies have...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr